Concrete Patios Tampa

 A Homeowner’s Guide in Preparing Concrete Patio

Home improvement projects can be affordable, exciting, and easy. A quick way to spice up a home is by adding a concrete patio, and here is the perfect guide to do it.

Since patios can be made from various materials, concrete remains the go-to choice for the majority of homeowners. Aside from the fact that it is affordable, it is known to be versatile, durable, and low maintenance. Concrete patios are less susceptible to immediate damages, can withstand inclement weather changes, and today’s market offers a wide range of designs for such. 

Ensure that the following materials are ready beforehand: measuring tape, hoe or shovel, handsaw, gravel, wire mesh, wooden forms, wooden stakes, and string. These will be handy in excavating and prepping the area and creating a frame where the concrete will be poured into. First, clean and prep the area by removing sod or dirt. Fill in the dig site with sand and gravel, making sure that the gravel base is compacted. It is highly recommended to use a wire mesh frame for additional support to the base and for the patio to withstand any weight. Once the perimeters are determined, use the wooden stakes as markers and attach the strings to allow a clear picture of how the patio will look like. Use the wooden forms to secure the perimeter by nailing or screwing it to the stakes, make sure it is sturdy as this will be filled in with cement.

After securing the base and layout, it is now time to pour the concrete. Since this is a small project, the concrete can be mixed using a wheelbarrow, however, for a larger project, it requires using an industrial mixer instead. Before pouring in the concrete, make sure to thoroughly dampen the gravel first. Once it is all set, pour the concrete mixture into the dig site and spread it evenly using a shovel until all forms are entirely covered. Ensure that the top of the concrete is completely level and flat by using a screed. Move it side-to-side or sawing motion to smooth any excess concrete. For further smoothing the surface, it is advisable to use a bull float. To provide traction to the patio, a stiff-bristled broom can be used to make a non-slip surface.

As part of the finishing touches, before the concrete completely dries, an edger can be used to round the edges of the patio. Concrete will now set and cure for 2 to 3 days depending on the weather. Concrete tends to dry quicker when the weather is hot and longer to cure during cold weather. Then the stakes and forms can be carefully removed after 3 days. It is recommended to wait 7 to 10 days before walking on the patio to ensure that it is fully cured.

It is a homeowner’s dream to have a patio in their home. A perfect place to chill and hang out. This can be possible with a simple DIY home improvement project and using the materials only from a credible source. For quick and easy DIY concrete patio projects, Tampa Concrete Solutions provides quality materials a homeowner might need for their next home renovation or improvement projects. 

Leave a Comment

Your email address will not be published. Required fields are marked *